High Quality Chemicals Product - Alumina Ceramic Filler High Alumina Inert Ball/99% alumina ceramic ball – AoGe
High Quality Chemicals Product - Alumina Ceramic Filler High Alumina Inert Ball/99% alumina ceramic ball – AoGe Detail:
Physical And Chemical Properties Of Inert Ceramic Balls
|
Physical and chemical properties of inert ceramic balls |
|||||||
|
Element |
Al2O3 ％ |
60 |
70 |
80 |
90 |
95 |
99 |
|
Fe2O3 ％ |
≤0.9 |
≤0.8 |
≤0.6 |
≤0.4 |
≤0.3 |
≤0.1 |
|
| The remaining components can be determined through negotiation between the supplier and the buyer when necessary. | |||||||
|
water absorption，％ |
3±1，It can also be determined by negotiation between the supplier and the buyer | ||||||
|
proportion，kg/m³ |
2.5-3.0 |
2.7-3.2 |
2.9-3.2 |
≥3.1 |
≥3.2 |
≥3.4 |
|
|
Bulk density，kg/m³ |
1400-1550 |
1400-1650 |
1500-1800 |
1700-1950 |
1800-1950 |
≥1900 |
|
|
Dust, crack or break |
A single bag is less than 5% |
||||||
|
Size deviation |
Uniform sphere, the ratio of the largest to smallest diameter of a ceramic sphere does not exceed 1.2 |
||||||
|
Dimensional tolerance |
≤10mm |
±1.0 |
|||||
|
11—25mm |
±1.5 |
||||||
|
26—50mm |
±2.0 |
||||||
|
≥50mm |
±3.0 |
||||||
|
Free fall strength |
Lossless rate ≥99％ |
||||||
|
Compressive strength |
φ3 |
≥250 |
≥300 |
≥350 |
≥400 |
≥500 |
≥500 |
|
φ6 |
≥800 |
≥1000 |
≥1000 |
≥1200 |
≥1500 |
≥1500 |
|
|
φ8 |
≥1500 |
≥1600 |
≥1800 |
≥2000 |
≥2500 |
≥2500 |
|
|
φ10 |
≥2000 |
≥2500 |
≥2800 |
≥3000 |
≥3500 |
≥3500 |
|
|
φ13 |
≥3000 |
≥3000 |
≥3500 |
≥4000 |
≥5000 |
≥5000 |
|
|
φ16 |
≥3500 |
≥4000 |
≥4500 |
≥5000 |
≥6000 |
≥7000 |
|
|
φ20 |
≥6000 |
≥6000 |
≥7000 |
≥8000 |
≥10000 |
≥12000 |
|
|
φ25 |
≥7000 |
≥7000 |
≥8000 |
≥10000 |
≥15000 |
≥17000 |
|
|
φ30 |
≥8000 |
≥9000 |
≥10000 |
≥12000 |
≥17000 |
≥19000 |
|
|
φ38 |
≥10000 |
≥12000 |
≥13000 |
≥15000 |
≥20000 |
≥22000 |
|
|
φ50 |
≥12000 |
≥14000 |
≥16000 |
≥18000 |
≥22000 |
≥26000 |
|
|
φ75 |
≥16000 |
≥18000 |
≥20000 |
≥22000 |
≥25000 |
≥30000 |
|
|
50-75 |
55-75 |
60-80 |
≥80 |
≥82 |
≥85 |
||
|
Wear rate % |
≤2 |
≤1 |
|||||
|
acid solubility，％ |
≤6 |
||||||
|
Alkalinity，％ |
≥77 |
≥85 |
≥90 |
≥92 |
≥95 |
≥97 |
|
|
Refractoriness，℃ |
≥400 |
≥500 |
≥700 |
≥1000 |
≥1000 |
≥1000 |
|
|
Resistant to sudden pressure difference |
Non-destructive rate ≥ 99%, no change in compressive strength and pressure after sudden change is less than 25% |
||||||
|
Resistant to sudden temperature changes |
Lossless rate≥99% |
||||||
|
Package |
Iron drum packaging |
Packed in iron drums, sealed with thick PP or PE plastic bags |
|||||
| Woven bag packaging |
Available in sturdy and UV-resistant woven bags |
||||||
| Note: Bulk density data is for reference only, not as a basis for acceptance. | |||||||
Another Note: See Table 5 For The Water Absorption Of 99 Filler Balls
|
99 Filling Ball Water Absorption |
||
|
99 filler |
diameter |
diameter |
|
roll forming |
φ＜25mm |
＜5％ |
|
Machine press forming |
φ＞25mm |
＜10％ |
99.5% Technical Indicators
|
Al2O3 |
≥99% |
|
SiO2 |
≤0.14% |
|
Fe2O3 |
≤0.04% |
|
CaO +MgO |
≤0.03% |
|
TiO2 |
≤0.06% |
|
Na2O |
≤0.1% |
|
K2O |
≤0.1% |
Physical Index Of Chemical Filler Ball
|
CONDITION |
INDEX |
|
load softening (yb/t370-1995) |
Deformation under 0.2mpa pressure is less than 0.6% |
|
Thermal shock resistance (yb/t376.2-1995) |
1200°C down to 600°C. 10 times without surface cracks |
|
Reburn line changes (gb/t3997.1-1998) |
1400 ℃ for 12 hours, the maximum value is 0.25%, the average value is less than 0.20% |
|
Bulk density (gb/t2997-2000) |
3.2-3.50 g/cm3 |
|
crushing strength |
Meet more than 230 kg/cm2 |
|
Apparent porosity |
12-18% |
|
Bulk density |
2.1-2.3g/cm3 |
Chemical Packing Ball Packing
1)Ordinary packing: polyethylene woven bag with net weight of 25kg, plus pallet
2)Steel drum packaging: 100L steel drum packaging, pallets can be added
Product detail pictures:
Related Product Guide:
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for High Quality Chemicals Product - Alumina Ceramic Filler High Alumina Inert Ball/99% alumina ceramic ball – AoGe , The product will supply to all over the world, such as: Germany, Johor, Poland, Item have passed by means of the national qualified certification and been well received in our main industry. Our expert engineering team will often be ready to serve you for consultation and feedback. We are able to also deliver you with cost-free samples to meet your specifications. Ideal efforts will probably be produced to provide you the most beneficial service and solutions. Should you be interested in our company and solutions, please make contact with us by sending us emails or call us straight away. To be able to know our solutions and enterprise. ar more, you'll be able to come to our factory to see it. We'll constantly welcome guests from all over the world to our firm. o build business enterprise. elations with us. Please feel absolutely free to speak to us for organization. nd we believe we will share the best trading practical experience with all our merchants.
By Fernando from Saudi Arabia - 2017.09.16 13:44
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Vanessa from USA - 2017.10.25 15:53
